Industrial solutions are being presented with the FLEXPOINT MVmicro
series of line lasers from Laser Components for all stand-alone 3D
image processing tasks. Easy to use. These lasers can easily be focused
and locked by hand. The line optics remains attached to the housing
during adjustment, which means that the laser class does not change
while the laser is being focused.
Thinnest lines. This optimized focal adjustment allows minimal line
thicknesses of 20-30 µm to be achieved. The homogeneity of the
power distribution is ±20% along 80% of the line.
Variations. Thanks to a large selection of different fan angles, almost
every line length can be implemented. Many wavelengths and output power
levels (i.e., up to 100 mW) are available.
Operation. MVmicro lasers require an input voltage between 4.5 and 30 VDC, and the electrical connection is an M12 plug.
Assembly. The potential-free housing measures 65 mm x 19 mm (length x
Ø). The output power of the lasers may optionally be adjusted
using a control signal between 0 and 5 V. Digital modulation for
synchronization with a camera is also available as an option.
More information at
www.lasercomponents.com/
back
top
