TECHNOLOGY
Ruhr-Universität Bochum
New concept for ultrafast lasers

By injecting spin-polarised electrons in semiconductor based microlasers, modulation speeds can be reached that are far superior to any conventional lasers.
Relaxation oscillations, as shown in (a) mark the maximum speed achievable in conventional semiconductor lasers. By using spin-polarised electrons, oscillations are generated in the polarisation of the light field, which can be much faster than the relaxation oscillations (b). Since the oscillation lifetime can easily be tuned via the current (c), such spin lasers are ideally suited for optical data transmission.
Electrical engineers in Bochum have succeeded in developing a new concept for ultrafast semiconductor lasers. The researchers make clever use of the intrinsic angular momentum of electrons, called spin, to successfully break the previous speed barriers. The new spin lasers have the potential to achieve modulation frequencies of well above 100 GHz in future. This is a decisive step towards high-speed data transmission, e.g. for the Internet of tomorrow.

Electrical engineers in Bochum have succeeded in developing a new concept for ultrafast semiconductor lasers. The researchers make clever use of the intrinsic angular momentum of electrons, called spin, to successfully break the previous speed barriers. The new spin lasers have the potential to achieve modulation frequencies of well above 100 GHz in future. This is a decisive step towards high-speed data transmission, e.g. for the Internet of tomorrow. The researchers report on their results in the prestigious journal “Applied Physics Letters” of the American Institute of Physics.

Optical data transmission: the basis of our information society
Optical data transmission by semiconductor lasers is a basic prerequisite for the globally networked world and today’s information society. The ever increasing degree of networking and the desire to exchange larger amounts of data are the driving force behind the development of ever faster optical data transmission systems. The maximum speed of conventional semiconductor lasers has long been a limiting factor - typical modulation frequencies are currently at levels well below 50 GHz.

Over 100 GHz possible: a barrier collapses
By using spin lasers, Bochum’s researchers were able to overcome the previous limits for the modulation speed. Whereas in conventional lasers, the spin of the electrons injected is entirely arbitrary, in spin lasers, only electrons with a previously determined spin state are used. By injecting these spin-polarised electrons, the laser is forced to work simultaneously on two laser modes with different frequencies. “This frequency difference can easily be tuned using the so-called birefringence in the resonator, for example by simply bending the microlaser” said Dr. Nils Gerhardt. By coupling the two laser modes in the microresonator, oscillation with a new frequency occurs, which can theoretically reach well over 100 GHz. The researchers around Dr. Gerhardt obtained their results in the collaborative research centre 491 of the Universities of Bochum and Duisburg-Essen (“Magnetic Heterostructures: Spin Structure and Spin Transport”).

More information
http://www.ptt.rub.de

Veröffentlichung
N.C. Gerhardt, M.Y. Li, H. Jähme, H. Höpfner, T. Ackemann, and M.R. Hofmann: „Ultrafast spin-induced polarization oscillations with tunable lifetime in vertical-cavity surface-emitting lasers“, Appl. Phys. Lett. 99, 151107 (2011), DOI: 10.1063/1.3651339
Paper im Internet:
http://apl.aip.org/resource/1/applab/v99/i15/p151107_s1



NEWS FROM THE TRADE SHOWS AND CONGRESS
more articles ( 16 )  more articles ( 16 ) 
40 Jahrfeier in München
LASER World of PHOTONICS 2013 provides photonic industry with upswing go
Messe München
Supporting program for the LASER World of PHOTONICS 2013 go
LASER World of PHOTONICS
Laser technologies drive mobility and energy generation forward go
PRODUCT INNOVATIONS
more articles ( 362 )  more articles ( 362 ) 
Coherent
Turnkey 550 mW, Sub-10 fs laser go
Trumpf - C1.241
A wealth of laser expertise focused in one place - new beam sources for material processing go
Rofin - C2.327
WE THINK LASER - new products provided by all business divisions go
MARKET-TRENDS
more articles ( 33 )  more articles ( 33 ) 
beratungsgruppe wirth + partner
Sunny prospects for young engineers and physicists in the Laser-/Optic-Industry go
TRUMPF Laser - C1.241
New development center supports innovative efforts go
Optech Consulting
Sales of Lasers used in material processing hit record high on world market go
TECHNOLOGY
more articles ( 60 )  more articles ( 60 ) 
Michigan Technological University
3D printing slashes optics lab costs go
Lasertechnik ILT
Laser Glass Soldering go
Italian Institute of Technology (IIT)
Light for people with eye diseases go
PHOTONICS INTERVIEW
more articles ( 6 )  more articles ( 6 ) 
INTERVIEW Dr. Helmut Selbach, Polytec GmbH
All facets of light go
INTERVIEW Prof. Dr. Waidelich
From a congress trade fair to a trade fair with congress go
INTERVIEW Dr. Wilhelm Kaenders, Toptica Photonics AG
Innovation, creativity and public perception go
WHO'S MOVED
more articles ( 6 )  more articles ( 6 ) 
Optoelectronics Research Centre (ORC) at the University of Southampton
Queen knights fiber Laser pioneer go
OSA
The OSA mourns the loss of Tingye Li go
John Tyndall Award
James Coleman wins John Tyndall Award go
CAREER TIPS
Laser Components
Pulsed laser modules are as small as a matchbox go
produktinnovationen
u2t Photonics
The world’s fastest coherent photodetector up to 64 Gbaud go
Spectrum Technologies
Two new models of free-standing, fixed beam laser systems with a high speed moving stage go
Conemtech
IEEE 1588 Technology to the Fiber go